Lamtec F200K Series, Руководство пользователя

Страница: 6 / 74

5
1 General Information
1 General Information
1.1 Validity of these Instructions
This document is valid for the F200K Compact Flame Scanner with hardware version 2.0 until
2.2
The devices correspond to the following directives and standards:
• DIN EN 298: 2012
• DIN EN 60730-2-5: 2015
• DIN EN 746-2: 2011
• 2014/68/EU Pressure Equipment Directive
• 2009/142/EG Gas Appliance Directive
• EU/2016/426 Gas Appliance Regulation (GAR)
• 2014/30/EU Electromagnetic Compatibility Directive
• 2014/35/EU Low Voltage Directive
• DIN EN 61508: 2011, part 2 (requirements SIL 3)
• DIN EN ISO 9001:2008 Quality Management Systems
• ISO/IEC 80079-34:2011 Potentially explosive areas - Quality Management System
(QAR)
• 2011/65/EU (RoHS2 Directive)
• UL372
Product-Identification-Number: CE-0085 BO 0005
NOTICE
LAMTEC retains the right to make changes to this document at any time, without notice.
LAMTEC makes no warranty of any kind, expressed or implied, with regard to any
information contained in this document, including, but not limited to, the implied warranties of
merchantability or fitness for any particular purpose.
Further LAMTEC does not warrant the accuracy or completeness of the information, text,
graphics, or other items contained within this document.
1.2 Purpose
In single-burner and multiple-burner furnaces, the flame scanner performs a high-safety mon-
itoring of the burner flame. When the flame goes out, the safe control state’ Flame ’ is reached.
The flame scanner is mainly used in large-scale power plants, thermal power stations and
chemical plants as well as for monitoring furnaces which are operated from.
– oil
– gas
– bio-mass
– dust coal
– chemicals and other waste products