BOX 422 • TOWER, MN 55790 • USA • Tel (218) 753-2330 • www.lamppakuuma.com
3
INTRODUCTION
Your Vapor-Fire Model 100 by Lamppa Manufactur-
ing and Distributing Co., Inc., is a highly-sophisticat-
ed, electronically-controlled, solid fuel furnace utiliz-
ing the latest space-age technology. If installed and
operated properly it should give you years of satis-
fying heat. Please read all of the instructions before
installing and operating your new Vapor-Fire Model
100.
We ask that you contact your sales person and ar-
range for a professional installation.
Installation must be done by a qualified installer.
LIMITED WARRANTY
Your basic Vapor-Fire Model 100 is warranted for
twenty-five (25) years from the date of purchase by
Lamppa Manufacturing and Distributing Co., Inc., if it
is installed and maintained according to the instruc-
tions provided by the manufacturer. This warranty is
voided if the Vapor-Fire 100 is used to burn materials
for which the unit is not certified by the EPA, and void
if not operated according to the owner’s manual.
Under this warranty the manufacturer will repair de-
fects in workmanship and replace defective parts
free of charge to the customer. Any repairs that might
require welding, burning, patching, etc., that is nor-
mally done in the manufacturer’s plant, the customer
shall ship the furnace, freight prepaid, to the plant at
no cost to Lamppa Manufacturing and Distributing
Co., Inc.
This warranty does not apply to any heat shields,
brick holders, or parts, such as seals, latches, hing-
es, other moving parts that wear out under normal
usage.
Under this warranty, all electrical components are
covered for a period of 90 days from date of pur-
chase if installed according to the manufacturer’s
instructions. The customer shall provide to the man-
ufacturer, proof of purchase. Any repairs or replace-
ment of components shall have a prior agreement
between the customer and the manufacturer, before
any such action is undertaken.
Dimensions ................................51.5” H x 27” W x 52.25” D
Flue Size .............................................................. 6” Diameter
Heat Outlet Size ...................................................... 24” x 24”
Fire Door Opening ........................................... 12” W x 12” H
Control Type ........................................................... Electronic
Ash Drawer Size ....................................19” L x 10” W x 3” D
Combustion Chamber .....................23” L x 15.5” W x 20” H
Maximum Wood Length ...................................................22”
Combustion Chamber Lining ......... Brick Liner and Cast Iron
Fan Limit Control .............................Honeywell L 4064B2210
Fan Low Limit .....................................White Rogers 3F01-33
24 Volt Honeywell Thermostat ...............................T87K1007
Fan Relay ....................................... Honeywell R8239A 1052
Electronic Draft Control ............... Vapor Fire Model 100/200
Draft Requirement ........................................ .03” - .06” W.C.
Filter .............................................................14” x 24” x 1” (2)
Cold Air Return ............................................... 22” W x 26” H
Power Req’d .....15 amps, 120 volt, 60 Hz No. 14 AWG wire
Clearance to Combustible
Side .....................................................................................6”
Front ..................................................................................48”
From the Flue Pipe ............................................................18”
Weight .................................................................695 pounds
Fuel Type ............................................................... Wood only
Chimney Requirement ....................................... 6” Class “A”
SPECIFICATIONS
Figure 1
27”
34.25”
24”
24”
30.75”
10”
18”
4.5”
2”
51.5”
6”
15.5”
Your Vapor-Fire Model 100 furnace is warranted for
(10) years against defects in materials and workman-
ship from the date of purchase, except for electrical
components and the blower, which carry a (1) year
manufacture warranty. Warranty does not apply to
fire-bricks, seals, latches, hinges, or other moving
parts subject to normal wear and tear.
The manufacturer’s warranty extends only to the orig-
inal purchaser, applies to normal residential use, and
is not transferable.
The furnace must be installed, maintained, and op-
erated according to the Manufacturer’s Operator’s
Instructions. The warranty is voided if the Vapor-Fire
100 is used to burn materials not certified by the EPA
and not operated according to the owner’s instruc-
tions.
Upon obtaining authorization, returned products are
to be shipped prepaid to the manufacturer. Transpor-
tation fees to ship the product back to the purchaser
will be paid by the manufacturer.
This warranty applies to products purchased after
September 1st, 2021.
