6 Graphical user interface
Issue EN 2022/05 PUK 6 Operating manual
38/56
Geometry selection
Fig. 6.5 Geometry selection
Universal setting for material thicknesses from ca. 0.3 mm.
Setting for sheet metal or wire parts equal to or thinner than ca. 0.3 mm.
This setting offers very low development of heat, especially for short weld-
ing times (
≤
0.3 mm)
Welding in sharp angles and tight joint situations. Here it is IMPORTANT to
use short welding times.
Melting of welding wire. Use identical alloy wire with a diameter of ca. 0.4
mm.
Application of welding wire on claws and stone settings. Particularly low-
energy melting of thin welding wire with a diameter of ca. 0.2 mm.
