9
SECTION 7 – LIST OF SPARE PARTS
100
150 151
152
Hand piece
100 100 complete hand piece
100 150 extrusion die
100 151 pliers
100 152 tension nut
Welding table
100 300 Welding table complete with 500mm cable
Electrodes
100 400 10 electrodes in display box (thoriumoxide-free)
Solder Cross Tweezers
100 750 Solder cross tweezers with 900mm cable
Pliers
100 500 Flat-point pliers with 900mm cable
Clamp
100 702 Electro clamp
Cable
100 306 Cable with 2 plugs 4mm, 500mm
100 307 Cable with 2 plugs 4mm, 1000mm
Grinding wheel
100 701 Diamond grinding wheel
SECTION 8 – EG Conformity Declaration
-
According to machine guidelines 98/37/EG, Appendix II A
-
According to low voltage guidelines 73/23/EWG
-
According to EMV (electro-magnetic compatibility) guidelines 89/336/EWG
The Manufacturer,
Lampert Werktechnik GmbH............................................................................................................................................
Julius-Echter-Str. 4, 97440 Werneck, Germany, ..............................................................................................................
declares that the product
“PUK 2” Precision Welding Device
conforms to the conditions set forth in the above-named guidelines, including any changes made up to the time of declaration.
The following harmonised standards were used:
Welding current sources for arc hand welding in limited operation: DIN VDE 0543 (VDE 0543)
Protective housing type (IP Code): DIN EN 60529 (VDE 0470-1)
Electro-magnetic compatibility (EMV): EN50199
Werneck, September 5th, 2002
Lampert Werktechnik GmbH
Andrea Bauer – Lampert (President and CEO)
