5
4-4.DESCRIPTION OF THE OPERATING COMPONENTS FRONT SIDE
(Figure 1)
Main switch
(1)
Output regulator
(2) Power regulated in 8 steps
Connecting socket for tool piece
(3)
Sockets
(4) for connection of contact elements such
as welding table, welding clamp, holding pliers.
Charger signal
(5) (red when charging)
Ready for use signal
(6) (green when device is ready
for welding)
Switch
(7) to select a quicker welding action
Switch
(8) to select between two different impulse
lengths
DESCRIPTION OF OPERATING COMPONENTS BACK SIDE
(Figure 2)
Connection of optical unit
(11) for filter control
Connection for inert gas
(12) for
∅
6.0mm pressure
tube
Plug
(13) to connect to power supply
Fuse box
(14)
