2
TABLE OF CONTENTS
SECTION 1 – GENERAL APPLICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
SECTION 2 – INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
SECTION 3 – GENERAL SAFETY INSTRUCTIONS - READ BEFORE USING. . . . . . .
3
3-1.
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
3-2.
Personal Protection and Danger. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
SECTION 4 – INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
4-1.
Technical Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
4-2.
Type Label Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
4-3.
Setting Up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
4-4.
Description of Operating Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
4-5.
Starting the Welding Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
SECTION 5 – OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
5-1.
Welding Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
5-2.
Basic Information and Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6
5-3.
Grinding the Electrodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
SECTION 6 – MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . .
7
6-1.
Routine Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
6-2.
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
SECTION 7 – LIST OF SPARE PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
SECTION 8 – EG CONFORMITY DECLARATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
SECTION 1 – GENERAL APPLICATION
•
the placement of spot welding on precious
metal and precious metal alloys, on steel and
steel alloys as well as titanium and various NE-
metals such as aluminium and brass.
•
not authorized for welding teeth fittings (dental
techniques)
•
Operation in outdoor areas is prohibited. Use in dry
room areas only.
No liability of any kind will be assumed for the
durability of welding spots. We recommend
that you always check the spots and to solder
them in case of doubt.
SECTION 2 – INTRODUCTION
PUK 2 provides a long-awaited missing link between
difficult joining techniques and laser welding devices.
With the help of an intelligent combination of high
performance electronics and precision mechanics, we’ve
been able to create a unique spot welding device. It’s
small size, low weight and minimum energy use are
important factors leading to your advantage. Excellent
ignition and welding characteristics allow a broad range
of use. With our welding device, you’re able to gain
access to new dimensions of welding techniques in the
area of production and repair.
