background image

10

www.howdens.com

2. Controls overview

 

(continued)

Understanding the sensor field

In principle, the sensor field functions the same 

as the touch controls; the only difference is that 

you can put your finger on the glass ceramic 

surface and then move it left and right.  

The sensor field recognises this movement and 

raises or lowers the display setting (power level) 

in accordance with the movement.

 

Sensor field

What must be observed when  

operating sensor fields?

 

Your finger should not be placed flat onto 

the glass ceramic surface in order to avoid 

adjacent keys/sensor fields from reacting by 

mistake.

sensor

sensor

vitroceramic

sensor

sensor

vitroceramic

The induction hob

The hob is equipped with an induction cooking 

mode. An induction coil underneath the glass 

hob generates an electromagnetic alternating 

field which penetrates the glass ceramic and 

induces the heat-generating current in the pot 

base.
With an induction cooking zone the heat is 

no longer transferred from a heating element 

through the cooking pot into the food 

being cooked; instead the necessary heat is 

generated directly in the container by means 

of induction currents.

Press the sensor field lightly or move your 

 

finger around

 

You can press the sensor field very lightly with 

your finger; when this is done the setting on the 

display (power level) will gradually change. 

When you put your finger on the sensor field 

and then move it to the left or right, the display 

setting will change progressively.
The faster the movement, the faster the 

change in the display.

touch

move

3. Operating the hob hood

Pan recognition 

 

If a cooking zone is switched ON and there is 

no pan on the zone or if the pan is too small, 

there will be no transmission of power. A 

blinking   in the power level indicator points 

this out.
If a suitable pot or pan is placed on the 

cooking zone, the hob power setting will switch 

ON and the hob power setting indicator will 

light up. The power supply will be cut off when 

the pan is removed and the hob power setting 

indicator will indicate a blinking  .
If the pots and pans placed on the cooking 

zone are of smaller dimension, and the pan 

recognition still switches ON, less power will be 

supplied.
The permanent pan recognition recognises on 

which cooking zone a pan is set up and shows 

a   in the corresponding hob power setting 

display.

Содержание LAM9550













































Отзывы: