background image

27

Exclusive to Howdens

4. Cleaning and care

• Switch the hob OFF and let it cool down 

before you clean it.

• Never clean the glass hob with a steam 

cleaner nor similar appliance!

• When cleaning make sure that you only wipe 

lightly over the ON/OFF key. The hob may 

otherwise be accidentally switched ON!

Specific soiling

Heavy soiling and stains (lime 

scaling and shiny, mother-of-

pearl-type stains) can best 

be removed when the hob is 

still slightly warm. Use glass 

ceramic cleaning agents to clean the hob. 

Proceed as outlined under weekly cleaning.
First soak 

food which has boiled over

 with a 

wet cloth and then remove remaining soiling 

with a special glass scraper for glass hobs. 

Then clean the hob again as described under 

weekly cleaning.

Burnt sugar

 and melted plastic must be 

removed immediately, when they are still hot, 

with a glass scraper. Then clean the hob again 

as described under weekly cleaning.

Grains of sand

 which may get onto the hob 

when you peel potatoes or clean lettuce may 

scratch the surface of the hob when you move 

pots around. Make sure that no grains of sand 

are left on the hob.

Changes to the colour

 of the ceramic surface 

have no effect on the function and stability of 

the glass ceramic.  

These colour changes are not changes in 

the material but food residues which were 

not removed and which have burnt into the 

surface.

Shining areas

 are caused by wear from 

pan bottoms or unsuitable cleaning agents, 

especially when using cookware with 

aluminium bases or by unsuitable cleaning 

agents. They are difficult to remove with 

standard cleaning agents. You may need to 

repeat the cleaning process several times. In 

time, the decoration will wear OFF and dark 

stains will appear as a result of using aggressive 

cleaning agents and faulty pan bases.

Glass hob

Important!

 

Never use aggressive cleaning agents such 

as rough scouring agent, abrasive saucepan 

cleaners, rust and stain removers etc.

Cleaning after use
1. 

Always clean the entire hob when it has 

become soiled. 

It is recommended that you do so every time 

the hob is used. Use a damp cloth and a 

little washing up liquid for cleaning. Then dry 

the hob with a clean dry cloth to ensure that 

there is no detergent left on the surface of 

the hob.

Weekly cleaning
2.

 Clean the entire hob thoroughly once 

a week with commercial glass ceramic 

cleaning agents. Please follow the 

manufacturer’s instructions carefully. When 

applied, the cleaning agent will coat the 

hob in a protective film which is resistant to 

water and dirt. All the dirt will remain on the 

film and can then easily be removed. Then 

rub the hob dry with a clean cloth. Make 

sure that no cleaning agent remains on 

the surface of the hob since this will react 

aggressively when the hob is heated up and 

will change the surface.

Содержание LAM9550













































Отзывы: