background image

32

www.howdens.com

490(+1)mm

520mm

800mm

750(+1)mm

*50mm minimum

to adjacent wall

*50mm minimum

to adjacent wall

50mm

FRONT

6. Installation

 

(continued)

Important information

• Avoid excessive thermal development from 

below e.g. from a baking oven without a 

cross flow cooling device.

• The induction hob may not be used when 

pyrolysis operation is taking place in a built-in 

oven fitted below hob.

• When installing the appliance on top of a 

drawer it is essential to ensure that no sharp 

items are stored in the drawer since these 

could become bent on the underside of 

the hob and prevent the drawer from being 

opened and closed.

• If a shelf has been inserted underneath the 

hob, there must be a clearance of at least 

20mm to the underside of the hob in order to 

ensure that the hob is sufficiently ventilated.

• The hob may not be installed above 

refrigerators, freezers, dishwashers, washing 

machines or dryers.

• To avoid danger of fire, make sure that no 

combustible objects which could easily 

catch fire or become deformed on exposure 

to heat are directly next to or under the 

surface.

Worktop cut-out

, (750x490mm)

Cut out the worktop recess 

accurately with a good, straight 

saw blade or recessing machine. 

The cut edges should then be 

sealed so that no moisture can 

penetrate.
The area is cut out as illustrated. The 

glass hob must have a level and 

flush bearing. Any distortion may 

lead to fracture of the glass panel. 

Make sure that the sealing of the  

hob is properly seated.

Important: 

There is a risk of breakage if the 

hob is canted or subjected to 

stress during installation!

*200mm recommended for safe 

practical use.

Sealing of the hob

Before installation, correctly insert the sealing 

unit delivered with the hob.

• No liquids may penetrate between the edge 

of the hob and the worktop or between the 

hob and the wall and come into contact 

with any electrical appliances.

• When installing a hob into an uneven 

worktop, e.g. with a ceramic or similar 

covering (tiles etc.), the seal on the hob is 

to be removed and the seal between the 

hob and worktop made with plastic sealing 

materials (putty).

• The hob must under no circumstances be 

sealed with silicone sealant! This would make 

it impossible to remove the hob at a later 

date without damaging it.

Содержание LAM9550













































Отзывы: