Lamona LAM9550, Инструкции пользователя и установка

Страница: 16 / 44

16
www.howdens.com
3. Operating the hob hood
(continued)
Permanent pan recognition
If the hob has permanent pan recognition, a cooking
setting can only be switched ON via the sensor field after
a pan has been detected on the hob and the power
display shows .
Operating the keys
The controls described here expect the pressing of
a (selection) key to be followed by the pressing of a
subsequent key. The next key will need to be pressed
within 10 seconds, otherwise the selection will be deleted.
Switching ON the hob and cooking zones
1. Press the ON/OFF key (approx. 1 sec.) until the hob
power setting appears and a short signal will sound.
The controls are ready for operation.
The permanent pan recognition recognizes on which
cooking zone a pan is set up and shows a in the
corresponding hob power setting display.
2. Use the hob power setting display (as a key) to select
a cooking zone. The stand-by dot of the cooking zone
selected will light up.
3. The touch control must be activated immediately
afterwards. A hob power setting will be switched ON.
left Power setting
centre Power setting
right Power setting *
See the section on Understanding the sensor field.
Press the respective sensor field
to change a hob power setting or to switch ON an
additional cooking zone.
Important: the stand-by dot of the cooking zone
selected must light up.
4. Immediately put cookware suitable for induction
cooking onto the cooking zone. The pan recognition
device will activate the induction coil. The pot or pan
will be heated up.
As long as no cooking pot is placed onto the cooking
zone, the display will alternate between the power level
set and the symbol . If no pot is placed on the cooking
zone it will switch OFF after 10 minutes for reasons of
safety. Please refer to the Section on pan recognition.
*The Power boost function is activated immediately.
See section on Hob power setting.
Stand-by dot
Suitable for induction cooking
2.
3.
4.
1.