31
Smart Home Control • Revision: 11-05-2016. • As of version 1.7 Subject to technical modifications and errors.
8.3.3 CONFIGURING WIFI
Requirements: The status LED of the WiFi
module glows permanently.
List the available wireless networks on
your mobile device. Select the network
"WLAN-Schnittstelle SOL" (WiFi interface
SOL). The mobile device then associates
with the WiFi module.
Launch the app. Fields where your can enter
your in-house wireless network settings "Net-
work Name (SSID)", "Encryption" and "Key"
are displayed.
Now press "Save" in the top right in the menu
view. After about 10 seconds, the LED on
the WiFi module flashes regularly for a short
time. The module is now connected to your
WiFi router.
First, again list the available wireless net-
works and connect to your own wireless net-
work. Then restart the app.
8.3.4 CONNECTING TO THE SMART HOME CONTROL
After successfully completing the WiFi con-
figuration and restarting the Lamilux Smart
Home App, a message appears, stating that
a Smart Home Control needs to be taught.
To do so, briefly interrupt the power supply
to the Smart Home Control (switch the circuit
breaker on the terminal unit off and back on
again).
A short audio signal indicates that the Smart
Home Control has been successfully taught.
The interface is now connected to the Smart
Home Control and can transmit data to the
Lamilux Smart Home App.
LED flash-
es regularly
at short
intervals
Connected to router
The WiFi module is now connected
to your router. Connect your mobile
device to the same wireless network
and launch the app.
LED goes
out briefly
every 2
seconds
No WiFi connection to router.
Connection could not be estab-
lished to your router. You may need
to move the WiFi module closer to
the router.
If you changed your router's access
data, reset the module to the factory
defaults (Section Resetting the WiFi
module to the factory defaults) and
proceed to configure as per section
WiFi.
FIG. 27
Screenshot no WiFi module
5
Einrichtung von Modul, WLAN, App
WLAN-Modul
• Stand: 01.06.2016 • Technische Änderungen und Irrtümer vorbehalten.
3.3.
WLAN konfigurieren
Voraussetzung: Die Status-LED des
WLAN-Modul
leuchtet dauerhaft.
Rufen Sie auf Ihrem Mobilgerät die verfügbaren WLAN-Netzwerke auf. Wählen Sie das Netzwerk
„WLAN-Schnittstelle SOL“ an. Das Mobilgerät verbindet sich daraufhin mit dem
WLAN-Modul
.
Starten Sie die App. Es erscheinen Eingabefelder in denen Sie Ihre hauseigenen WLAN-Einstellun-
gen „Netzwerkname (SSID)“, „Verschlüsselung“ und „Schlüssel“ eingeben.
Drücken Sie nun „Sichern“ oben rechts in der Menüansicht. Nach etwa 10 Sekunden blinkt die
LED am
WLAN-Modul
regelmäßig kurz auf. Das Modul ist nun mit Ihrem WLAN-Router verbunden.
Rufen Sie nun zunächst erneut die verfügbaren WLAN-Netzwerke auf und verbinden sich mit Ihrem
hauseigenen WLAN-Netzwerk. Starten Sie die App dann erneut.
3.4.
Verbindung zur Smart Home Steuerung herstellen
Nach erfolgreicher WLAN-Konfiguration und erneutem Start der Lamilux Smart Home App er-
scheint der Hinweis, dass eine Smart Home Steuerung eingelernt werden muss. Unterbrechen Sie
hierzu kurz die Stromversorgung der Smart Home Steuerung (Sicherung der Anschluss-Einheit
aus- und wieder einschalten).
Ein kurzes Tonsignal zeigt, dass die Smart Home Steuerung erfolgreich eingelernt wurde.
Die Schnittstelle ist nun mit der Smart Home Steuerung verbunden und kann Daten zur Lamilux
Smart Home App übertragen. Die App ist nun einsatzbereit.
LED Blinkt regelmäßig kurz auf
Mit Router verbunden
Das WLAN-Modul ist mit Ihrem Router verbunden. Verbinden
Sie sich mit Ihrem Mobilgerät in das gleiche WLAN-Netz und
starten Sie die App.
LED erlischt kurz alle
2 Sekunden
Keine WLAN Verbindung zum Router.
Es konnte keine Verbindung zu Ihrem Router hergestellt wer-
den. Stellen Sie gegebenenfalls das WLAN-Modul näher zum
Router auf. Sollten die Zugangsdaten Ihres Routers geändert
worden sein, setzen Sie das Modul auf Werkseinstellung
zurück (Abschnitt WLAN-Modul auf Werkseinstellung zurück-
setzen) und fahren Sie fort mit Abschnitt WLAN konfigurieren.
Abb. 3 Screenshot Kein WLAN-Modul