18
Smart Home Control • Revision: 11-05-2016. • As of version 1.7 Subject to technical modifications and errors.
For more information on the values for
brightness and wind, see section 4.3.6 of the
manual. Units for sun and wind, page 181.
6 – Time reception
(only for operation with the weather
station)
If the wireless icon appears on the home
screen, the controller has received the cur-
rent time through the GPS receiver built into
the weather station within the past 5 minutes.
If no wireless icon appears, then no time sig-
nal has been received for more than 5 min-
utes. The controller's internal clock will keep
working.
7 – Functions of the active output
The functions of the selected output are
shown in the right margin of the display,
for example, the automatic mode status.
You will find a detailed description in section
5.3.1. Meaning of function icons (Automatic
status), page 18.
8 – Rocker for manual operation
9 – Outputs
You can use the rocker to move or switch
the individual outputs manually. The outputs
are shown at the bottom of the screen with
the display slot number and type icon. The
selected output is indicated by a box around
the display slot number.
Note that at this point only those outputs are
displayed for which the displays has been
enabled (see manual section Display slot
in the descriptions of the basic settings for
motorised control units (RF-MSG, weather
station), for relays (RF relay, RF-HE) and for
dimmers (RF-L).
Change the output.
Manually move or switch the selected
output.
Selected output is disabled for manual
operation (alarm function active).
5.3.1 MEANING OF FUNCTION ICONS
(AUTOMATIC STATUS)
If a weather station is used, then the icons
show the automatic mode status of the se-
lected output and the alarm functions appli-
cable for manual mode. A function is only
displayed if it has been activated for the out-
put.
SHADING (BLINDS, AWNINGS, ROLLER SHUTTERS)
Note that several conditions must be met for
an action such as "extend shading". The func-
tions are listed here in order of priority. In other
words, the sun protection function is not exe-
cuted until all previously stated functions have
released shading.
A detailed description of the automatic
mode functions can be found in the Auto-
matic shading section of the manual.
