background image

DC Power

Connection

Serial 

Connections

2 bi-directional RS-232 Ports 

Sense Input

Connections

2 ELAN Sensor
input Ports 

IR Outputs

4 discrete IR channels.
Compatible with Xantech 
single and dual emitters.

USB Modem Connections

USB - See Integration Notes for compatible equipment

Ethernet Connection

Ethernet - 10/100 Mbps
PoE IEEE 802.3at Type 2
48 VDC, 600 mA 

Relay 

Connections

2 Normally Open Relays
12VDC 24VAC @ 1 
AMP Compatibility

WIFI Antenna

802.11 b/g/n 

Reset

Reset's the 
unit's IP  address 
to factory default 
(DHCP). 

Press and hold 
for programming 
reset.

Factory use

ONLY

gSC2  

Rear Panel Connections

gSC2

 

Quick Install Guide

®

1.   Read these instructions.
2.   Keep these instructions.
3.   Heed all warnings.
4.   Follow all instructions.
5.   Do not use this apparatus near water.
6.   Clean only with dry cloth.
7.   Install in accordance with the manufacturer’s instructions.
8.   Do not install near any heat sources such as radiators,  
      heat registers, stoves or other apparatus  
      (including amplifiers) that produce heat.
9.   Only use attachments/accessories specified  
      by the manufacturer.
10. Unplug this apparatus during Iightning storms or when 
      unused for long periods of time.
11. Refer all servicing to qualified service personnel.  
      Servicing is required when the apparatus has been 
      damaged in any way such as power-supply cord or plug  
      is damaged, liquid has been spilled or objects have  
      fallen into the apparatus, the apparatus has been  
      exposed to rain or moisture, does not operate normally,  
      or has been dropped. 

FCC and IC Information:

This Class B digital apparatus complies with Part 15 of the  
FCC rules and with Canadian ICES-003 and RSS-210.  
Operation is subject to the following two conditions:
1.   This device may not cause interference and
2.   This device must accept any interference, including
      interference that may cause undesired operation  
      of the device. 

Cet appareil numérique de classe B est conforme aux normes  
canadiennes ICES-003 et RSS-210. Son fonctionnement est 
soumis aux deux conditions suivantes : (1) cet appareil ne doit 
pas causer d’interférence et (2) cet appareil doit accepter toute 
interférence, notamment les interférences qui peuvent affecter  
son fonctionnement.

 

Warning: 

Changes or modifications to this unit not expressly 

approved by the party responsible for compliance could void  
the user’s authority to operate the equipment. 

FCC and IC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set 
forth for an uncontrolled environment and meets the exemption 
from the routine evaluation limits in section 2.5 of RSS 102. 

1.   This Transmitter must not be co-located or operating  
     in conjunction with any other antenna or transmitter.
2.   This equipment complies with FCC RF radiation exposure 
      limits set forth for an uncontrolled environment.  
      This equipment should be installed and operated 
      with a minimum distance of 20 centimeters from user  
      and bystanders. 

Warning:

 The device meets the exemption from the routine 

evaluation limits in section 2.5 of RSS 102, and users can  
obtain Canadian information on RF exposure and compliance 
from the Canadian Representative Product Solutions Group  
at Tel: (519) 763-4538. 

Notice: 

Use only the antenna provided with the product:

R-SMA Antenna, Aristotle Enterprises Inc.
p/n RFA-02-L2M2-M10-N, gain of 2.0 dBi.

English

Important Safety Instructions

© 2013 Core Brands, LLC. All rights reserved. ELAN

®

 , g!

®

  and Panamax

®

  

are registered trademarks of Core Brands, LLC, a Nortek company.

P/N 9901333  Rev. E 05 /2014

Dimension:

 8-1/2” W x 1-9/16” H x 5” D (half rack)        (215.9mm W x 39.69mm H x 127mm D)

This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required  
antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type,  
are strictly prohibited for use with this device.

Cet émetteur radio a été approuvé par Industrie Canada pour fonctionner avec les types d’antennes énumérés cidessous avec le gain maximal admissible et impédance 
d’antenne requise pour chaque type d’antenne indiqué. Types d’antennes n’est pas inclus dans cette liste, ayant un gain supérieur au gain maximal indiqué pour ce type,  
sont strictement interdits pour une utilisation avec cet appareil.

Antenna Type

Peak Gain

Dipole Antenna

2.09dBi

FEDERAL COMMUNICATIONS COMMISSION  
INTERFERENCE STATEMENT:

This equipment has been tested and found to comply with  
the limits for a Class B digital device, pursuant to part 15  
of the FCC Rules.  
 
These limits are designed to provide reasonable protection 
against harmful interference in a residential installation.  
This equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio communications.

However, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception,  
which can be determined by turning the equipment off and on, 
the user is encouraged to try to correct the interference  
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different 
   from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.

Informations concernant l’exposition aux fréquences radio (RF): 

 

La puissance de sortie émise par l’appareil de sans fil est inférieure à la limite ‘exposition aux fréquences radio d’Industry Canada (IC). Utilisez l’appareil de sans fil de  
façon à minimiser les contacts humains lors du fonctionnement normal. Ce périphérique a également été évalué et démontré conforme aux limites d’exposition aux  
RF d’IC dans des conditions d’exposition à des appareils mobiles (antennes sont supérieures à 20 cm à partir du corps d’une personne).

Reviews: