![Lamborghini Caloreclima Futuria 24 PLUS MB W TOP Скачать руководство пользователя страница 64](http://html1.mh-extra.com/html/lamborghini-caloreclima/futuria-24-plus-mb-w-top/futuria-24-plus-mb-w-top_installation-and-maintenance-manual_3387091064.webp)
41
FLUE EXHAUST INSTALLATION
●
CONCENTRIC FLUE
EXHAUST: max length 3 m
●
DOUBLE FLUE PIPE (
Delivery): max length 50 m.
ATTENTION: Use only air intake/ fumes evacuation kits produced by Lamborghini Caloreclima.
DOUBLE FLUE PIPE
The flue pipe should slope slightly upward ( a gradient of about 3%) and outward so that any condensation
which forms in the boiler can be collected.
Installing an elbow to connect the boiler to the chimney will cau-
se a drop in pressure.
The values set out in the table below indicate the necessary
reduction to the length of the linear pipes.
TYPE OF
INSTALLATION
CONCENTRIC FLUE
EXHAUST
DOUBLE FLUE PIPE
(INTAKE/EXHAUST)
90
°
ELBOW
FITTED
1 m.
0.6 m.
45
°
ELBOW
FITTED
0.5 m.
0.3 m.
CONCENTRIC FLUE PIPE
Fit the concentric elbow pipe positioning it in the desired direction and insert the sealing gasket on it.
Fit the air intake and flue pipes, observing the distances indicated on the installation diagram. The flue
pipe should slope slightly upward ( a gradient of about 3%) and outward so that any condensation
which forms in the boiler can be collected.
64
ESQUEMA DE MONTAJE
DESCRIPCIÓN
CiR
Circulador instalación
PSG
Presostato de seguridad gas
PA
Presostato aire
PH2O
Presostato agua
E.A.
Electrodo de encendido
E.R.
Electrodo de detección
TRA
Transformador
IG
Interruptor general
VG
Válvula gas 1-2
M1
Regleta de bornes pa27
VD
Válvula de 3 vías
E/I
Selector verano/invierno
TA
Termostato ambiente
TB
Termostato acumulador
SE
Sonda exterior
SR
Sonda retorno
SM
Sonda ida
VN
Ventilador
X2
Conector amp. 13 vías
X3
Conector amp. 6 vías
X4
Conector amp. 2 vías
X7-X8
Conector conexión ordenador
3AT
Fusible 3A (electroventilador)
2AF
Fusible 2A (circuitos 24 V)
2AF(F1)
Fusible alimentación 230 V (2A)
CL
Cable línea 230 V 50 Hz
C
Conector Wieland
FA
Filtro antiparasitario
Para conectar el termostato ambiente TA hay que quitar el puente
1-2
de la regleta de bornes
M1
.