lamber M115, Инструкция по эксплуатации

Страница: 36 / 42

36
A - Check that the wheel of micro FC1 projects sufficiently from the bracket and is operated
by the shelf.
B - Check that micro FC1 is effective and the respective cable is connected correctly.
7 - The tanks don't stop being filled upon reaching the desired level
A - Check that the trap of the pressure switch has no porosities and the connection pipe is
not disconnected .
B - Check that the pressure switch is in good conditions and is calibrated .
C - Check that there is no dirty in the solenoid valve. This drawback can be noted because
the machine continues to load water, whilst the main on/off switch is off .
8 - Insufficient washing
A - Check that the detergent is effective, of the type for industrial dishwashing machines, and is
proportioned for the right concentration .
B - Check that the detergent container is not empty and operates correctely .
C - Check that the jets of the washing and pre-rinsing arms are not clogged. If necessary, clean them.
D - Check that the dishes are placed in the respective racks. Soup plates have to be mandatorily
placed in rack type P12-16.
E - Check that the temperatures in the tanks are the specified ones.
F - One or several pumps don't operate, in this case check that:
- the overload cutuot didn't switch the pump in question and, if necessary,restore it (this drawback
is displayed by lamp M (LS3) being ON)
- finally, the pump is not blocked, the motor is effective and rotates in the right direction.
PUMPS ELECTRICAL COMPONENTS
1st wash
PUMP
M02
CONTACTOR MT5
CUTOUT
RM2
H - Shadings or spots present on dishes,specially on glasses, may be caused by minerals present in
the water. In such an event, it is suggested to analyze the water used. The contents of calcium and
magnesium in the water should not exceed 10°F. The presence of iron should not exceed 0,1 ppm. If
these values are exceed, it is suggested to treat the water as appropriate .
I - A preliminary softening is suggested prior to washing knives, forks and spoons
9 - Temperatures insufficient in one or several tanks