lamber M115, Инструкция по эксплуатации

Страница: 34 / 42

34
STEAM CONDENSER
As regards the machines provided with “vapour
condensing” device, pay attention to the
following:
The adjustment of the device is carried out by
means of the regulator valve (COCK
“V” )
placed inside the machine base plate and
marked with its special label.
The Manufacturer should rule this cock while
testing the machine.
Never touch this cock without a specific
reason.
This valve rules the water flow in the vapour
condensing battery.
If the machine needed a more precise
adjustment, under regular conditions, adjust
the valve until no more vapour comes out of
the “vapour condensing” cap.
Generally it is sufficient to slightly open the
valve.
ATTENTION! An excessive opening can
cause the cooling of the tank.
V
Desc-lav/DES-CVMREGOL-2012
WASHING AUTOTIMER
Thanks to the AUTOTIMER device it is
possible to reduce water and power
consumption when the machine is not used. As
default the function ‘Autotimer’ is disabled.
It’s possible to program the times of stop of
4’-6’-8’ (calculated from when the last rack has
come out) by setting up the dip-switch
positioned on the electronic card that is in the
control box.
Look at the following diagrams:
Disabled Autotimer :
1 2 3 4 ON
AUTOTIMER
OFF
OF F
Autotimer after 4’ min. :
1 2 3 4 ON
4’ min
OF F
Autotimer after 6’ min. :
1 2 3 4 ON
6’ min
OF F
Autotimer after 8’ min. :
1 2 3 4
ON
8’ min
OF F