lamber M115, Инструкция по эксплуатации

Страница: 14 / 42

14
M115
First Section - FOR THE USER
OPERATION BEFORE WORKING
B
EFORE STARTING THE WORKING OPERATION BE SURE THAT
:
- the wall-mounted on/off switch is switched on;
- the water and steam* cocks are open;
- water and steam (*) are present in the system;
- the filters are in their housings
- curtains are correctly positioned;
- the inspection doors are closed;
- the dimensions of the dishes to be washed do not exceed the washing working
dimensions;
- Check that the detergent and rinse aid containers are not empty.
- Switch the machine on . Go to the page dealing with the model selected .
(*) for steam machines only
DETERGENTS
In case the machine is not provided with an automatic dispenser, pour the detergent
directly into the washing tank and uniformly distribute it on the filters in the doses indicated
by the supplier.
N.B.: If you make use of chlorinated sanitizers , it is always advisable to employ an
automatic dispenser with feeler for the measurement of the detergent concentration ,
because brownish spots can form on the surfaces due to chlorine reactions when pouring
the detergent directly into the tank.
In any case the product shall be introduced near the pump suction pipe in the tank and at
least 15 cm far from the bottom in order to avoid corrosion.
Choice of the suitable cleansing agent is an essential condition if you want to obtain
extremely good washing results as concerns hygienic results. It is then important to
consider some points. First of all only highly alkaline and chlorine-active antifoam
products, especially made for industrial dish-washing machines, must be used and they
must be produced by well known reliable Firms.
Mean concentration of the cleansing agents in powder must be 1,5÷2,5 g/lt. Mean
concentration of liquid cleansing agents nust be 2÷4 g/lt.
In order to avoid scales and corrosions, put cleansing agent above water level on the
nearest area of the sucking pump filter, in this way it will immediately dilute and will not
deposit on the tank bottom.