Lake Shore 420 Скачать руководство пользователя страница 7

Страница: 7 / 54

Lake Shore Model 420 Gaussmeter User’s Manual

Introduction

1-1

CHAPTER 1

INTRODUCTION

1.0 GENERAL

Lake Shore Cryotronics, Inc. designed and manufactures the Model 420 in the United States of America. It is

highly accurate and ideally suited for field work. It features:

• Field Measurement:

– DC Accuracy: ±0.45% of Reading ±0.05% of Range.

– Auto

Range.

– DC or AC Field Measurement.

– Individual Linearization of Hall Probes.

• Alphanumeric Display:

– 4-character, 1 Part In 3,000 Resolution On All Ranges.

– 2 Line by 16 Character Backlighted Liquid Crystal Display.

• Other Operating Functions:

– Gauss or Tesla Units.

– Max

Hold.

– Relative

Reading.

• Interface:

– Serial Interface (RS-232C Electrical Format).

– Corrected and Monitor Analog Outputs.

• Probe Compatibility:

– High Stability Probes (HST) – 300 G to 300 kG Full-Scale Ranges.

– High Sensitivity Probes (HSE) – 30 G to 30 kG Full-Scale Ranges.

– Ultra High Sensitivity Probes (UHS) – 300 mG to 30 G Full-Scale

Ranges.

We welcome comments concerning this manual. Although we make every effort to keep it error-free, some

may occur. When reporting a specific problem, describe it briefly and include the appropriate paragraph,

figure, table, and page number. Send comments to Lake Shore Cryotronics, Attn: Technical Publications, 575

McCorkle Blvd., Westerville, Ohio 43082-8888. This manual is subject to change without notice.

1.1 MODEL 420 GAUSSMETER SYSTEM DESCRIPTION

The Model 420 has an easy-to-use front panel that includes an alphanumeric Liquid Crystal Display (LCD) for

message-based front panel operation. Perform and monitor most operations through the front panel keypad

and message display. The display has a resolution of 4-characters.

The Model 420 measures fields from 3 mG (0.3 µT) to 300 kG (30 T), in either gauss or tesla. Set field ranges

either manually or with auto ranging. The

Range

key displays the full scale value and cycles through

allowable ranges for the probe installed. The Auto Range function automatically selects the range with the

best resolution for the measured field.

The gaussmeter measures both DC and AC field values. In DC operation, it displays the field at the probe

with the sign (orientation), followed by appropriate field units. In AC operation, it displays a RMS value for the

field at the probe. The DC and AC values are available over the Serial I/O Computer Interfaces and also the

Corrected Analog Output. The Monitor Analog Output displays actual magnetic field waveform.

The Max Hold function captures and displays the largest field magnitude since the last Max Reset. After

pressing

Max Hold

, the maximum value appears in the lower display while the upper display contains the live

field reading. In AC RMS, the Max Hold feature displays the maximum RMS value of the waveform.

The relative function displays small variations in larger fields. The

Relative Set

key captures or defines a

relative setpoint which becomes the zero point of the relative reading and appears on the lower line of the

display. The relative reading appears in the top display with a

▲

symbol. The relative reading maintains the

same resolution and units as the setpoint.

Accept new settings in two ways: 1) Wait a few seconds until the built in timeout returns you to the normal

display, or 2) Press any key other than the function currently addressed. For example, after changing the

range, press any key other than Range.

Содержание 420























































Результаты поиска

Содержание 420

Отзывы:

Бренды по названию

Популярные бренды

Lake Shore 420, Руководство пользователя

Результаты поиска

Содержание 420

Отзывы:

Бренды по названию

Популярные бренды