Operator's Manual –
Slam'N'Jam
©
LAI GAMES
Page 51
SERVICE CONTROLS:
Located on the service panel mounted on top of the cash box and accessed through
the Coin Door.
SERVICE BUTTON:
Used to input credits to the game without activating the
coin counter, and to perform test procedures in combination with the test button
TEST BUTTON:
Used to perform the test mode, in combination with the
Service button.
VOLUME KNOB:
Used to adjust the speaker‟s sound level.
POWER CORD
The power cord is a standard IEC power cord (as used on computers) that is
plugged in to the power inlet socket at the rear of the machine. The power cord
can be removed for transport.
POWER INLET
The power inlet is located at the rear of the machine on the Left-hand side as
viewed from the rear. It is a standard IEC inlet socket.
MAINS SWITCH
The mains switch is located on the power inlet assembly along with the mains
fuse, and IEC inlet socket.
FUSES
For locations of all fuses refer to Fuses and Fuse location of this manual.
7-SEG DISPLAY
There is a 3-digit display located on the Back-board panel. Access is at the back of
the machine.
BALL SENSOR
There is a IR proximity sensor located on the Back-board panel. Access is at the
back of the machine.
* WARNING! *
Always
turn
OFF
Mains power and unplugged the game, before replacing any
fuses
Always
use the correct rated fuse.
SERVICE
BUTTON
VOLUME
KNOB
TICKET
METER
COIN
METER 1
TEST
BUTTON
TICKET METER
For More Information, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
