Operator's Manual –
Slam'N'Jam
©
LAI GAMES
Page 23
TEST MODE
The Slam'N'Jam Test mode has Three Test Configurations allowing you to explore the
functioning of the Sound, Light & Display, the Game Switches and to allow an
operational test of the Ball Gate. (Refer to the Test Mode Diagram below).
The Test mode is also used for Clearing Game Errors. If there is an active error, its
code will be displayed. To try to clear the error code, press the red test button once.
The error can be bypass by quickly pressing the red test button twice.
TEST MODE DIAGRAM
* NOTE! *
Entering Test Mode will CLEAR any CREDITS remaining in the game.
If during test mode no ADJUSTMENTS or actions are made to the game for
approximately four minutes, it will automatically RETURN to Attract Mode.
PROGRAMMABLE ADJUSTMENTS MODE
PLAY MODE
The Display counts,
all Lamps are flashing
and Sound is played
ATTRACT MODE
SOUND, LAMPS & DISPLAY TEST
No INPUT is active
Ball Sensor
is active
Service switch
is active
Coin switch
is active
Gate Open Switch
is active
To
1 1 1
9 9 9
C
0 0
C 0 1
C 0 2
C 0 6
C 0 8
PRESS TEST
PRESS TEST
SWITCH INPUT TEST
PRESS TEST
PRESS TEST
RUN TEST
0 0 0
r
1
r r
R
r
PRESS
SERVICE
BALL GATE RUN TEST
Press Service button to activate
LED displays run test function
Er# indicates Ball Gate problem
Loops back
r
3
E r 6
PRESS
SERVICE
r
0
r
2
E r 5
Ball Gate Opening
Ball Gate Open
Gate Opening Error
Ball Gate Closing
Ball Gate Closed
Gate Closing Error
For More Information, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
