laguna PX20, Руководство пользователя

Страница: 7 / 43

7
14. Keep safety guards in place at all times when the machine is in use. If removed
for maintenance purposes, use extreme caution and replace the guards
immediately when maintenance is complete.
15. Make sure the dust collector is on a flat even surface and the wheels locked in
place before use.
16. Check damaged parts. Before further use of the machine, a guard or other part
that is damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment of moving parts,
binding of moving parts, breakage of parts, mounting and any other conditions
that may affect its operation. A guard or other part that is damaged should be
properly repaired or replaced.
17. Provide for adequate space surrounding work area and non-glare, overhead
lighting.
18. Keep the floor around the machine clean and free of scrap material, oil and
grease.
19. Keep visitors a safe distance from the work area. Keep children away.
20. Make your workshop child proof with padlocks, master switches or by removing
starter keys.
21. Give your work undivided attention. Looking around, carrying on a conversation
and “horse-play” are careless acts that can result in serious injury.
.
22. Maintain a balanced stance at all times so that you do not fall or lean against the
dust collector. Do not overreach or use excessive force to perform any machine
operation.
23. Use the right tool at the correct speed and feed rate. Do not force a tool or
attachment to do a job for which it was not designed. The right tool will do the job
better and safer.
24. Use recommended accessories; improper accessories may be hazardous.
25. Maintain machinery with care. Follow instructions for lubricating and changing
accessories.
26. Turn off the machine before cleaning. Use a brush or compressed air to remove
dust or debris — do not use your hands.
27. Do not stand on the machine. Serious injury could occur if the machine tips over.
28. Never leave the machine running unattended. Turn the power off and do not leave
the machine until it comes to a complete stop.
29. Never operate or run the machine without closing the drum up against the lid.
Failure to do so will result in the machine amperage increasing and may trip your
circuit.
Familiarize yourself with the following safety notices used in this manual: