laguna PX20, Руководство пользователя

Страница: 11 / 43

11
UNPACKING
Your PX20 comes packed in a single box attached to a pallet. Before attempting to
assemble this machine, follow these directions:
1. Carefully cut the banding straps and remove them from the box, if so packed.
2. Remove the box covering the machine.
3. Remove the plastic cover from the machine, if so packed.
4. Remove the wrapped dust chute.
5. Using the information below, ensure that all parts are present and in good condition.
This step requires a forklift. The PX20 is heavy, be careful when lifting and handling
it! Failure to comply may cause serious injury and/or damage to the machine and/or
property! Use a forklift to remove PX20 from pallet and place on floor.
NOTE: Another option to remove the planer from the pallet is to attach hooks to frame of
machine at each of the four corners. The machine can then be lifted with a harness and
forklift.
NOTE: Another option to remove the planer from the pallet is to attach the included
hooks to frame of machine at each of the four corners (Fig. 1). The hooks and bolts are
included in the hardware kit. The machine can then be lifted with a harness and forklift.
Remove and save hooks for later movement scenarios.
Figure 1: Lifting planer with hooks and harness