laguna PX20, Руководство пользователя

Страница: 18 / 43

18
NOTE: Drawing pencil marks across the width of the top of the
calibrating board in several locations can make it easier
to determine when the entire surface has been planned.
7. Measure the thickness of the calibrating board with a caliper.
8. Loosen the screws of the Thickness Scale pointer and adjust the pointer
(Fig. 8, B) until it corresponds to the measured thickness and tighten the screws.
Calibrating the DRO (Digital Read Out)
1. Remove the battery cover of the DRO and install 2 AAA batteries.
Figure 9: DRO Batteries