laguna Plasma Level 2 CNC, Руководство пользователя

Страница: 36 / 160

36
5.) Lifting with Crane (Recommended- Cont’d. )-
5.) Take each end of the strap and put chain through them and attach the eye hook back to the
hoist chains.
6.) Before lifting, make sure straps are even on both sides of the machine and tight underneath
the machine and up against the table leg.
7.) Move crane close to the center of gravity of load.
8.) Use protection (i.e., cardboard/heavy blanket) if you feel any scratches or damage could result
to machine components while lifting.
9.) Begin to lift the machine above the truck bed and confirm that load is not tipping in either
direction by doing a complete walkaround.
10.) Reposition straps and crane as necessary to keep load stable and balanced.
11.) Once the load is balanced and stable, lift the machine clear of the vehicle.
12.) Lower the machine to floor level and place it firmly on the ground at the designated area of
operation.
CAUTION: Before moving the machine into position, it is essential to plan for the
path of travel to ensure that no hazards exist in the path that could result in any
damage.
NOTE: Ensure machinery skates are placed in all four corners of the machine
base if they are used.