laguna MT01002, Руководство пользователя, Страница: 9 / 49

Table
The table is manufactured from cast iron [cast iron is a live material and will
move over time] and is provided with leveling bolts that clamp the table to
the cabinet and also level it.
Spindle housing
The spindle housing assembly is attached to the table and is of heavy cast-
iron construction. It houses the motor, spindle, tilt mechanism, and vertical
movement adjustment. This is the heart of your machine and allows
adjustment of the cutter speed, angle and position.
Shaper fence system
The machine is supplied with a shaper fence system that incorperates the
following features: dust port, aluminum adjustable fence system [with
fingers], hold-down, hold-in assembly.
Electrical system
The electrical system consists of an electrical motor [with breaking system],
start switch, stop switch, limit switches, door switch, speed indicators,
contactor and internal breaker. No cable or plug is supplied as the length of
the cable and the type of plug will be dependent on your installation. There is
a CEE plug and socket fitted to the machine to allow easy connection and
disconnection of the electrical power to the machine.
Control panel
The control panel has the following features:
1.
Main isolation switch. This switch isolates the electrical system from
the main system.
2. Forward / reverse switch.
3. Emergency stop button.
4. Stop button.
5. Start button.
6. Speed selected indicator lights [1400, 3500, 6000 and 8000rpm].
The spindle tilt and vertical movement handles are located next to the control
panel.
Dust collection
A dust collection port is located at the back of the machine and is 4” inch
diameter. It connects to the bottom of the spindle housing. A second dust
collection port is located at the back of the shaper hood and has a diameter
of 4 3/4” inches.
8