laguna MT01002, Руководство пользователя, Страница: 25 / 49

1. Disconnect the power from the machine.
2. Open the access door.
3. Loosen the ratchet handle to remove the tension on the drive belt.
4. On the door is located the pulley speed selection chart.
5. The belt runs through a metal “U” bracket that is attached to a speed
selection knob. When you change the speed selection knob to the required
speed, then you can move the belts to the relevant pulleys. The speed
selection knob controls the indicator lights on the control panel.
6. Tension the drive belt by pulling the handle that is attached to the motor
support plate and lock in position with the ratchet clamping screw.
7. Close the access door.
8. Reconnect the power to the machine and check that the indicator light
corresponds with the speed selected.
Spindle tilt
The spindle can be tilted by
unlocking the adjustment
handle; rotating the handle
until the angle indicator is at
the angle required and
locking the adjustment
handle.
Tilt handle Vertical handle
Handle lock
Angle indicator
Control handles
Rotation
selection switch
Spindle rotation
The spindle rotation can be changed by
selecting “1” or “2” on the rotation selection
switch.
25