laguna MT01002, Руководство пользователя, Страница: 10 / 49

Table insert rings
On the machine there are 3 table insert rings and a blanking disc to allow for
different cutter configurations and sizes.
Sliding table
The sliding table is manufactured from heavy aluminum extrusion. The table
is supported by ball bearings that roll on heavy, ground steel rods. The
clearance between the ball bearings and the ground steel guide rods is
adjustable. The advantage of the bearing system is that there is only a point
contact between the balls and the rods, which virtually eliminates the
problem of dirt building up, and the sliding table will remain accurate for
many years. When wear takes place, the ground steel rods can be rotated
and present a new surface to the ball bearing.
Miter fence
The miter fence is extendable and is supplied with two flip stops and a job
clamp. At the end of the fence there is a plate that supports the job. The
miter fence can be set at any angle between 90 and 45 degrees and has an
adjustable 90 degree flip stop.
Mobility kit [Optional]
The mobility kit is easy to fit, and the machine is located directly on the floor
when the mobility kit is not in use.
Tenoning table and guard [optional]
A tenoning tab
le
and guard are available as an option.
9