laguna 37 x 2, Руководство пользователя

Страница: 39 / 82

Machine Operation 39
USING THE DEPTH STOP- A Depth Stop (Figure 16) is located on the column tube just above the tale support
casting on the right (inboard) side. The Depth Stop casting has a locking knob located on one side of the casting.
To Operate the
Depth Stop :
• Determine desired thickness of sanded part by either referencing the depth gauge or sanding a part and
measuring the thickness of the sanded part.
•
At this sanding thickness, position the depth stop along the column tube with the gauge resting on the table
support casting and tighten the locking knob on the depth stop.
This will give a desired exiting thickness to the material and help prevent under dimensioning.