![background image](http://html2.mh-extra.com/html/laguna-tools/revo-10/revo-10_operating-manual_3315771012.webp)
12
Fitting and removing the face plate
The face plate has flats for a wrench. To remove
the face plate from the head stock spindle, insert
the knock out rod or a shaft of the same
diameter into the hole on the side of the lathe
spindle and loosen the face plate with a wrench.
To fit a face plate reverse the removal
procedure, as described earlier.
Variable speed control
The speed of the spindle is adjustable
between 410 rpm and 3700 rpm.
The lathe is provided with a three pulley
system to optimize the torque. Always
select suitable pulleys for the type of
work being undertaken.
Changing pulleys is covered later in the
manual.
On-off switch
The on-off switch activates or
deactivates the motor. The switch is
provided with a safety pullout. With the
yellow pull out removed, the switch is
deactivated.
Wrench flats Face plate
Knock-out rod
Speed display
Speed-control knob
On/Off switch
Safety pullout
Speed display
Speed-control knob
Содержание REVO 10
Страница 1: ...1 2072 Alton Parkway Irvine CA 92606 www lagunatools com 800 234 1976...
Страница 17: ...17 Parts breakdown and exploded view...
Страница 18: ...18...
Страница 19: ...19...