Laguna Tools REVO 10, Руководство по эксплуатации

Страница: 9 / 24

9
Where to locate your machine
Before you remove your machine from the packaging, select the area where you
will use your machine. There are no hard-and-fast rules for its location, but below
are a few guidelines:
1. There should be an area at the front of the machine suitable for comfortable
working.
2 . There should be sufficient area at the back of the machine to allow access for
adjustments and maintenance to be conducted.
3 . Adequate lighting. The better the lighting, the more accurately and safely you
will be able to work.
4 . Solid workbench or similar.
5 . Locate it close to a power source and dust collection point.
6 . Allow an area for the storage of blanks, finished products and tools.
Unpacking your machine
To unpack your machine, you will
need tin snips and a knife.
1 . Using the tin snips, cut the
banding that is securing the packing
box (If fitted) to the pallet.
WARNING: EXTREME CAUTION
MUST BE USED, AS THE
BANDING WILL SPRING AND
COULD CAUSE INJURY.
2.
Open the box and remove the
parts that are supplied with the lathe.
3. Remove the upper packaging.
4. Lift out the lathe and place it on the workbench.
Note: The lathe is heavy, and you will need two people to lift it out of the
packaging.
Note: If you have any doubt about the described procedure, seek professional
assistance. Do not attempt any procedure that you feel is unsafe or that you may
not have the physical capability of achieving.
Packaged lathe