Laguna Tools REVO 10, Руководство по эксплуатации

Страница: 6 / 24

6
Noise emission
Notes concerning noise emission:
Given that there exists a relationship between noise level and exposure times, it
is not precise enough to determine the need for supplementary precautions. The
factors affecting the true level of exposure to operators are clearly the amount of
time exposed; the characteristics of the working environment, such as other
sources of dust and noise, etc. For example, adjacent machines may impact the
level of ambient noise. It is also possible that exposure level limits will vary from
country to country.
Specification sheet
Receiving your machine
Note:
It is probable that your machine will be delivered by a third party. Before
you unpack your new machine, you will first need to inspect the packing, invoice
and shipping documents supplied by the driver.
Ensure that there is no visible damage to the packing or to the machine. You
must do this prior to the driver leaving. All damage must be noted on the delivery
documents and signed by you and the delivery driver. You must then contact the
seller (Laguna Tools, Inc.) as soon as is practical. If damage is found after
delivery, contact the seller as soon as is practical.
Note: It is probable that you will find sawdust within your machine. This is
because the machine has been tested prior to shipment from the factory and or
Laguna Tools, Inc.
Motor 1/2 HP
Voltage 110V
Amps 6 amps
Swing over bed 5" (127mm), 10" diameter (254mm)
Distance between centers 16" (406mm)
RPM range 410 to 3700 rpm
Spindle Bore 0.433" (11mm)
Thread 1" x 8 TPI RH
Outboard thread 3/4" x 16 TPI LH
Head and tail stock Morse taper No. 2
Tool rest 6" (152mm)
Face plate 3" (76.2mm)
Tail stock travel 2.25" (57mm)
Weight 79lbs (36kg)
Shipping weight 86lbs (39kg)