Laguna Tools CFLUX2, Руководство пользователя

Страница: 28 / 48

2 & 3 HP Mobile Dust Cyclone Manual
28
38. Use (24) Round-head Philip bolts
3/16
” x 1/2 ” and (24) Cap nuts (3/16 ” )
to assemble the drum insert together.
Place the drum insert inside over the
plastic bag in the Octagon drum.
39. Lift the foot pedal bar. Align the
Octagon drum window to the center
point of the drum lid and push the
drum in. Lower the foot pedal bar to
seal the drum tight for normal machine
operation.
40. Make sure when aligning the drum
that both the left and right-side lift
plates are over the topping on the foot
pedal bar assembly before lifting the
foot pedal bar up. When not aligned,
the drum will not be fully sealed and
will interfere with air flow.
41. Open the Switch Box by removing
th
e bolt at the bottom of the switch bo x
to mount to the switch base plate using
(4) 3/8
” x 1 ” hex bolts, (8) 3/8 ” flat
washers and (4) 3/8 ” hex nuts.
Drum insert
1 3
2