Laguna Tools CFLUX2, Руководство пользователя

Страница: 25 / 48

2 & 3 HP Mobile Dust Cyclone Manual
25
26. Secure the movable supporting
brace on the foot pedal bar with the
octagon foot pedal
using (2) 3/8” x
21mm hex bolts. Make sure the bolt
head is on the inside of the octagon
foot pedal. Adjust the tightness of this
bolt accordingly. If this bolt is too
tight, the Octagon foot pedal will not
work smoothly. When too loose it will
not pick up the Octagon drum.
27. Secure the movable supporting
brace on the foot pedal bar with the
octagon foot pedal
using (2) 3/8” x
21mm hex bolts. Make sure the bolt
head is on the inside of the octagon
foot pedal. Adjust the tightness of this
bolt accordingly. If this bolt is too
tight, the Octagon foot pedal will not
work smoothly. When too loose it will
not pick up the Octagon drum.
28. Apply foam tape to the cone
flange before attaching the drum lid.
Secure the Octagon drum lid to the
cyclone funnel using (6) 5/16” x 3/4”
hex bolts, (12) 5/16” x 1” flat washers
and (6) 5/16” hex nuts. Make sure to
first attach all the bolts before
tightening. NOTE: The lid will turn
when the bolts have not been
tightened for alignment. Failure to do
will result in the drum lid not being
able to align with the drum.
29. Attach the crossbar to the drum lid
and tighten using the two bolts
removed in the previous step. It does
not matter which position you attach
the crossbar.
Crossbar
Octagon foot pedal
Movable supporting brace
You will find a tag on the cone with
the following warning. Take note
and remove tag when you have
completed this step.