Laguna Tools CFLUX2, Руководство пользователя

Страница: 17 / 48

2 & 3 HP Mobile Dust Cyclone Manual
17
UNPACKING
Your 2HP or 3HP Mobile Dust Cyclone comes packed in a single box. Before
attempting to assemble this machine, follow these directions for unpacking:
1. Carefully cut the banding straps and remove them from the box.
2. Cut along the tape line at the top of the box.
3. Remove all parts from the top of the foam and set aside.
4. Remove the foam packing material from the top of the machine and set
aside for further use, during assembly .
5. Cut the cardboard box (top to bottom) in the four corners for easy
removal of the box.
6. Carefully take out the machine components from the box and set aside.
7. Using the diagram below, ensure that all parts are present and in good
condition.
DESCRIPTION (QUANTITY); Figure 6:
A. Motor
B. Switch and remote controller
C. Dust chute
D. Top upright supports (3)
E. Canister 1 Micron
F. Base frame
G. Rotation shaft
H. Rotation paddle (2)
I. Crossbar
J. Octagon drum lid
K. Cyclone funnel
L. Cyclone barrel
M. Intake cylinder
N. Canister cover plate
O. Octagon front and back panel
P. Octagon drum foot pedal
Q. Inlet adapter 8 ” by 4 ” x 2ports (CFLUX2 only)
Q. Inlet adapter 8 ” by 4 ” x 3ports (CFLUX3 only)
Q1.Inlet adapter 8 ” by 6 ” (CFLUX2 only)
R. Lower upright supports (3)
S. Drum insert
T. Upright support reinforcement plate (3)
U. Foot pedal bar (left and right)
V. Foot pedal assembly fittings
V1. Lower triangular support plate (2)
V2. Foot pedal bar support (2)
V3. Lower support plate (2)
W. Hardware box
X. Operating and Parts Manual
Y. Dust bags