Lagler Trio, Эксплуатация Обслуживание Безопасность

Страница: 17 / 52

17
5.2 REASSEMBLY AFTER TRANSPORT
When reassembling your TRIO after transporting it please proceed
according to the following sequence:
1 Roll chassis into attachment position so that the two fasteners
can be homed in.
2 Tighten the two crossnut fasteners firmly.
3 Remove the on/off switch from motor switchbox and hook it
into support on the chassis.
4 Insert the plug of the sensor into the on/off switch and lock
this fasten connection by turning the ring nut. Make sure
the nose of the plug is inserted in the groove of the socket
(Fig. 21).
Machine will not start as long as this plug is disconnected!
5 Mount dust suction hose to the neck of the dust suction and
gear casing.
5.3 STORAGE
If the machine is to be stored for a longer period, make sure it is
stored in a dry, frost-free room which is not subject to great fluctua-
tions in temperature.
Fig. 21 Make sure that the nose of the plug is inserted
into the groove of the socket.
TRANSPORT AND STORAGE
Professional tip:
Remove the sanding gear from the machine when
the machine is not to be used for longer periods,
because otherwise the machine weight can dam-
age the flexible sanding disc base.
ATTENTION!
Always store your machine without a dust bag or with an empty
one, never with dust in the bag (danger of fire!).
5