Lafayette Auto-Lift Parasol Cellular Shades Скачать руководство пользователя страница 4

2

GETTING STARTED

Thank you for purchasing battery-powered motorized shades. With proper installation, operation, 
and care, your new shades will provide years of beauty and performance. Please thoroughly 
review this instruction booklet before beginning the installation. 

Tools and Fasteners Needed

 

Flat blade and Phillips screwdriver

 

Level (laser level is recommended)

 

Measuring tape and pencil

 

Power drill, 

3

/

32

" drill bit, and  

1

/

4

" hex driver

In addition, you will need fasteners designed to work with your specific mounting surface(s).

 

#6 Hex Head Screws (Provided). 

Two 1

1

/

2

" screws are provided per installation bracket.

 

Longer #6 Hex Head Screws (Not Provided). 

If using spacer blocks, use #6 screws long 

enough for a secure attachment.

 

#6 Flat Head Screws (Provided). 

If end mounting the shade, use two 1

1

/

2

" screws per 

installation bracket.

 

Speed Nuts and Screws (Provided). 

Extension brackets come with speed nuts and screws.

 

Drywall Anchors (Not Provided). 

Use drywall anchors when mounting into drywall.

Speed Nut 

and Screw

(Provided with Each 

Extension Bracket)

#6 x 1

1

/

2

"

Hex Head Screw

(Provided)

Longer #6 Hex Head Screw 

for Use with Spacer Blocks

(Not Provided)

#6 Flat Head Screw 

for Use with Common

Headrail End Mounts

(Provided)

Содержание Auto-Lift Parasol Cellular Shades























Отзывы: