Lafayette Auto-Lift Parasol Cellular Shades, Руководство по установке

Страница: 11 / 22

INSTALLATION
9
Mount the Installation Brackets — End Mount
End mount the headrail when conventional mounting techniques will not work — for example, in
an arched window opening.
■
Position the end mount brackets so that the top of the attached installation brackets are at
the ordered height of the shade.
CAUTION: Both brackets must be installed at the same depth and height.
■
Mark both screw holes for each end mount bracket.
➤
The mounting surface must be vertical
and flat, not part of an arched curve.
➤
Minimum mounting depths and minimum
flush mount depths vary depending upon
your shade(s) pleat sizes and mounting
options. To determine specific mounting
depths, refer to the chart on page 5.
NOTE: The measurement for a
fully recessed end mount is from the front
of the window casement to the back of
the mounting bracket.
■
Drill the holes using a
3
/
32
" drill bit.
■
Attach the end mount installation brackets using the flat
head screws provided.
CAUTION: Drywall mounting is not recommended.
IMPORTANT:
For instructions on installing an arch
over a rectangular shade, see the installation,
instructions that came with your arch shade.
Proceed to “STEP 2 — Install the Shade” on page 10.
1
1
/
4
"
Minimum
Ordered
Shade
Height
1
1
/
4
"
Minimum
Ordered
Shade
Height