Lafayette Auto-Lift Parasol Cellular Shades, Руководство по установке

Страница: 19 / 22

OPERATION
17
Troubleshooting
If your shade is not operating correctly:
■
First review the guide that came with your remote control or wireless wall switch.
■
Next refer to the following troubleshooting procedures below for the specific solutions for
your shade.
Problem
The shade will not fit into the installation brackets.
Solution
Check that the installation brackets are level and aligned. Adjust and/or shim to
level, if necessary.
Be sure the heads of the mounting screws are flush against the installation
bracket.
Make sure that the shade fabric is not caught between the installation bracket
and the headrail.
Check that the headrail is completely inserted into the installation brackets. See
“STEP 2 — Install the Shade” on page 10.
Problem
The shade is not responding to the remote or the wireless wall switch.
Solution Battery power may be low in the battery wand or satellite battery pack. Replace
the batteries.
Check that the battery wand, satellite battery pack, or DC power supply is
securely connected to the power cable and the cables are not pinched or caught
in the headrail or installation brackets.
Reset the shade. See “Resetting a Window Covering to its Factory Defaults”
in the
Remote Control Guide or the Wireless Wall Switch Guide for further
information or see “Resetting the Shade” on page 16.
See the Remote Control Guide or the Wireless Wall Switch Guide for operation or
programming troubleshooting solutions.