Lafayette Auto-Lift Parasol Cellular Shades, Руководство по установке

Страница: 16 / 22

INSTALLATION
14
If You Have a DC Power Supply...
Connect the Power Supply
■
Plug the power cable from the shade into the extension cable.
■
Plug the other end of the extension cable into the DC power supply.
■
Plug the DC power supply into a standard outlet.
■
Secure the power supply cable using wire retainers (not supplied). If
hiding the cable behind the shade, make sure it does not
impede the operation of the shade.
■
Space the wire retainers approximately 15" apart along
the power supply cable, as shown.
WARNING:
Keep cables and small parts out of
the reach of children. They can wrap cables
around their necks and
STRANGLE . They can also
put small parts in their mouths and
CHOKE
.
WARNING: Electric shock and/or a fire hazard
may occur, if not properly installed.
Proceed to “Operate the Shade” on page 15.
If You Have a DC Power Supply with Daisy-Chain Connections...
The daisy-chain feature allows up to three shades to be powered by a single DC power supply.
However, each shade has its own receiver eye and can operate independently. The daisy-chain
feature is only available with the DC power supply option.
■
Route the power cables from each shade through the connector, using an extension cable,
if necessary.
■
Plug an extension cable into the connector and the DC power supply. Two extension cables
and two connectors are used for three shades.
Power Cable
from the Shade
Extension
Cable
DC Power
Supply
Plug
15" (Max)
Power
Supply
Wire Retainer
Power Cable
from Shade
Extension
Cable
Power Cable
from Shade
Connector