Lafayette Auto-Lift Parasol Cellular Shades, Руководство по установке

Страница: 17 / 22

OPERATION
15
Operate the Shade
Test the Shade Using the Manual Control Button
Testing the shade with the manual control button will allow you to ensure that the motor and
power source are working correctly.
CAUTION:
When raising the shade for the first time, observe how the fabric stacks. It should
stack evenly. If the bottom rail is not level, the shade starts to rub against either window jamb,
or the shade height is incorrect, immediately stop the shade. See “Level the Bottom Rail (If
Necessary)” on page 16.
■
Press the manual control button on the bottom of the
end cap to test operation.
➤
Press the button to alternately lower, stop, and raise
the shade.
NOTE:
For Bottom-Up/Top-Down and Day/Night shades the bottom rail must be in the fully
lowered position to operate the middle rail. The middle rail must be in the fully raised postion
to operate the bottom rail.
■
If the shade does not operate, see “Resetting the Shade” on page 16 or refer to
“Troubleshooting” on page 17.
Further Operation and Programming Information
Remote Control Operation
For information regarding operation and programming of the remote control,
refer to your
Remote Control Guide .
Wireless Wall Switch Operation
For information regarding operation and programming of the wireless wall switch,
refer to your
Wireless Wall Switch Guide .
Home Automation Control via the Connection Interface
For information regarding operation via a home automation system, refer to your
Connection Interface Installation Guide .
Manual
Control
Button
Front of
Shade
Note: The wireless wall switch will
not be available until 3Q 2014, but
we left it in these instructions. If you
wish, remove it from this page and the
troubleshooting section.