LaCie DDS4 Drive, Руководство пользователя

Страница: 11 / 40

11
3. Setting Up Your LaCie DDS4 Drive
Connecting the AC Adapter
To operate the drive, you must use the AC adapter supplied with it.
Warning! Use only the AC adapter supplied with your LaCie drive.
Using any other power cable may cause damage to the device and
void your warranty.
Important Note: You may use your LaCie drive when in a foreign
country, thanks to its auto-switching 100-240 Volt power supply. To
be able to use this feature, you may need to purchase an appropriate
adapter. Consult LaCie Technical Support for assistance in choosing the right
adapter. LaCie accepts no responsibility for any damage to the drive resulting
from the use of an inappropriate adapter. Using an adapter other than one
authorized by LaCie will void your warranty.
Connecting the AC Adapter to the Drive
1) Insert the AC cable into the power input located at the rear of the drive.
2) Connect the wall-side plug to a power socket.
Disconnecting the AC Adapter from the Drive
1) Turn the drive off and wait for it to spin down (+/- 10 sec.).
2) Hold the drive steady with one hand, then remove the plug from the
connector.
Warning! Always remove the AC adapter before transporting your
LaCie drive. Failure to remove the adapter may result in damage to
your drive and will void your warranty.
3.1 Installing Your LaCie DDS4 Drive
There are five main steps to this installation process:
3.1.1 - Software Installation
3.1.2 - SCSI Card Verification
3.1.3 - Setting the SCSI ID Number
3.1.4 - Connecting the Drive to the Computer
3.1.5 - Drive Recognition