LaCie DDS4 Drive, Руководство пользователя

Страница: 26 / 40

26
other device drivers or
extensions? Support.
Does your computer’s
configuration meet the
minimum system
requirements for use with
this drive? Check section 2.1
Minimum System
Requirements .
Are you powering on the
SCSI peripherals before
the computer? You must power on all
SCSI peripherals
connected to your
computer before turning
on the computer.
Otherwise, the SCSI
peripherals will not be
recognized.
Is the drive’s SCSI ID
number the same as that
of another device on the
SCSI chain? Check the ID numbers of
all devices in your SCSI
chain and change them if
necessary. Each device
must have an individual
number, i.e. if you had an
external CD-RW, a Hard
Drive and Tape drive
connected on the same
SCSI chain, you would
have the CD-RW ID set at
1, the Hard Drive set at 2
and the Tape drive at 3,
or similar.
Is the terminator on the
drive set correctly? Check the terminator. It
should be attached for an
LVD/Wide drive only if it is
the last device in your
SCSI chain. Otherwise, it
should not be attached.
Are the pins and holes in
the SCSI connectors
straight and not
deformed? Turn off your computer
and SCSI peripherals and
check the cables and
connectors. Replace the