4. Setting Up Your LaCie Biggest S1S
page 23
LaCie Biggest S1S
User’s Manual
4.2. Creating An Array
This step will initialize the array.
1) Ensure that the RAID level is correctly set and configured.
2) On each of the individual Drive Bays, pull the Drive Bay Handle to release
the latch. Then slide each of the Drive Bays out from the LaCie Biggest S1S
slightly.
3) Connect the power cable to the LaCie Biggest S1S and a grounded
electrical outlet.
4) Turn on the LaCie Biggest S1S by pressing the Power Switch.
5) Slide each of the Drive Bays back into the LaCie Biggest S1S, and push
the Drive Bay Handles flat to lock the Drive Bays into place.
Once all of the Drive Bays have been closed and locked, the LaCie Biggest
S1S will check the status of the four installed disks. If all four of the disks
have not been initialized before (which will be the case for the first
connection of the LaCie Biggest S1S), the RAID level initialization will begin
automatically.
1
2
Step 3
Step 3
Step 4
Step 4
