LaCie Professional Server
5big Enclosure: Disk Install
Technical Brief: RAID
page 8
Fig. 04 - 5big Drive Tray and Four Screws
Fig. 05 - To prevent ESD, avoid touching the hard drive
printed circuit board
3.5. Fastening a non-LaCie Hard
Disk to the 5big Enclosure Drive
Tray
IMPORTANT INFO:
Drives sold by LaCie are the preferred choice
for your 5big Storage Server. LaCie disks specially prepared for the
5big enclosure are tested and shipped in a drive tray for easy instal-
lation. Additionally, all 5big hard drives include a 3-year warranty.
Visit
www.lacie.com
for more information on purchasing a 5big disk
drive.
Please note the following before fastening your non-LaCie hard
drive to the drive tray:
✦
Only 3.5” SATA II drives may be used in the 5big enclosure.
Please visit the Support page at
www.lacie.com
for a list of
drives that have been tested by LaCie. LaCie cannot guaran-
tee performance or compatibility with the 5big Storage Server
when using non-LaCie drives or drives that have not been
tested by LaCie.
✦
Use only the screws supplied in your packaging when fasten-
ing the non-LaCie hard drive to the drive tray (
Fig. 04 - 5big
Drive Tray and Four Screws
)
✦
To avoid potential problems caused by electrostatic discharge
(ESD), it is recommended that you do not touch the hard
drive’s printed circuit board (
Fig. 05 - To prevent ESD, avoid
touching the hard drive printed circuit board
). As a further
precaution against ESD, please use an anti-static wristband
or an anti-static mat to ground yourself when handling the
hard drive.
continued on the next page>>
