replacing the hard drive using the same disk tray.
Using a Phillips head screwdriver, carefully unfasten all four screws from their four slots.
Gently slide the disk out of the tray.
Place the empty disk tray onto a flat work area with the handle on the bottom left.
Many disks have a label on one side and the printed circuit board on the opposite side. With its label
side facing up, gently place the hard disk within the disk tray. Keep the SATA connector facing to the
right. The four screw slots should align with the disk’s four screw holes.
51
LaCie 2big Dock Thunderbolt 3
8/9/17
