Labrie EXPERT 2000 2002, Руководство оператора

Страница: 54 / 69

EXPERT 2000
54
3.4.18 HOPPER DAILY CLEANING
Cleanliness is part of safety, ensure the
equipment works properly by removing any
compacted garbage in the packer area, and
clean all the truck lights, warning lights and
safety stickers so you and the surrounding
pedestrians and vehicles, will be safe around
the vehicle at all times. To clean out the packer
area you will have to do the following
procedure:
HOPPER CLEANING PROCEDURE
• Leave the packer blade extended
(Figure #3.32);
• Raise the crusher panel all the way.
• Proceed with the appropriate tag
out procedure;
• Open the cleaning trap on each side
on the rear hopper area (Figure
#3.34);
• Pull the floating panel giving access
to the rear area of the packer blade.
(Figure #3.33);
• Remove any bulky piece of garbage
in the area;
• Rake small pieces of garbage
towards the cleaning traps (Figure
#3.34);
• Finish cleaning the area with
pressurized water.
FLOATING PANEL
CLEANING BEHIND
PACKER BLADE
FIGURE #3.32
FIGURE #3.33