Labrie EXPERT 2000 2002, Руководство оператора

Страница: 48 / 69

EXPERT 2000
48
DANGER
3.4.12 LOADING CORRECTIVE ACTIONS 3.4.13 EMERGENCY ACTIONS
HYDRAULIC OIL SPILL
• Disengage the hydraulic system and
stop the truck engine;
• Close all the valves on the hydraulic
reservoir;
• Carefully inspect the cause of the
leak;
• Call the maintenance facility and
report your findings;
• Before you restart the engine be
sure that the pump will not turn on
and pump any hydraulic oil;
• In the case of a dry valve system,
you have to get the driving shaft of
the pump removed before restarting
the engine;
• The same thing applies for a
transmission mounted pump. Do
not engage it until you have tagged
out the control appropriately;
• When it will be time to start the
pump again ensure that all valves
on the hydraulic reservoir are fully
open.
PACKING RAM WILL NOT CYCLE:
• Ensure the hydraulic system is
engaged;
• Check selector switch;
• Check red buttons (3);
• Check the fuses.
• Press the yellow button to ensure
the ram is completely retracted;
• Try from another control station (in
cab);
• Verify around packing ram for any
obstruction preventing it to move
freely;
• Report your findings to the
maintenance facility.
SOMEONE IS TRAPPED IN
PACKER SYSTEM
• Hit the nearest emergency control;
• Call for help then proceed with first
aid.