Labounty 513914 Скачать руководство пользователя страница 96

Страница: 96 / 98

LIMITED WARRANTY

New Attachment

Stanley LaBounty warrants its manufactured products against deficiency in material or workmanship for

a period of 12 months from the date of first use, rental or sale, or 1500 hours of operation, whichever

occurs first.

LIMITATIONS

• Remanufactured or used product or service repair are not warranted under this Limited Warranty.

• Product that is damaged by alteration, improper maintenance, unauthorized service, abuse,

misuse, or contamination by the base machine is not warranted.

• This Limited Warranty is the exclusive warranty. Stanley LaBounty makes no representations,

expressed or implied, of merchantability or fitness for a particular purpose.

• Agents of Stanley LaBounty have no authority to make representations beyond those contained

herein.

EXCLUSIVE REMEDY

The exclusive remedy for a product Stanley LaBounty determines deficient in material or workmanship

is repair or replacement at Stanley LaBounty’s option. The following procedure governs a repair or

replacement warranty claim:

1. All warranty claims require a claim number provided by Stanley LaBounty Service Department.

2. A factory-issued Return Material Authorization tag (RMA) must accompany returned product.

3. Returned product found deficient by Stanley LaBounty will be replaced or repaired without charge

FOB Distributor/Customer or will be credited to account balance.

4. Authorized repair can occur at the Stanley LaBounty factory or authorized Stanley LaBounty Dealer.

Labor for warranty repair will be paid under a formula determined by Stanley LaBounty.

Stanley LaBounty is not liable for incidental or consequential costs or losses incurred by the product,

purchaser or user.

LIMITED WARRANTY

To validate the Limited Warranty, a completed warranty certificate and delivery inspection report must be

returned to Stanley LaBounty. Prohibited operation and/or unauthorized adjustment or assembly will void

this Limited Warranty. See the Operation, Maintenance and Safety Manual.

CONTACT INFORMATION

Contact your Stanley LaBounty Dealer or Stanley LaBounty regarding warranty questions. All requests

for information, service or spare parts should include model and serial numbers. For the nearest Stanley

LaBounty dealer contact:

Stanley LaBounty

1538 Highway 2

Two Harbors, MN 55616-8015 USA

Phone: (218) 834-2123 or (800) 522-5059

FAX: (218) 834-3879

E-mail: [email protected]

Website: www.stanleyhydraulic.com

Содержание 513914



































































































Результаты поиска

Содержание 513914

Отзывы:

Labounty 513914, Руководство по безопасности, эксплуатации и техническому обслуживанию, Страница: 96 / 98

Результаты поиска

Содержание 513914

Отзывы: