![LABORIE UROCAP IV Скачать руководство пользователя страница 14](http://html2.mh-extra.com/html/laborie/urocap-iv/urocap-iv_owners-manual_3194219014.webp)
14
LABORIE Urocap™ IV Owner’s Manual UC4-UM01
3.4
ENVIRONMENTAL CONSIDERATION OF WASTE DISPOSAL
Due to the fact that the Urocap™ IV is designed to perform Uroflow studies, it is important to dispose of waste
(such as urine) properly to prevent environmental pollution. The waste should be disposed of in such a way that
will not pollute the fresh water supply system — especially the drinking water system. Normally, this is not an
issue in areas that have proper sewage systems with water treatment procedures. In this case, the most
convenient way is to use these sewage systems.
4
DEVICE SETUP
4.1
PERFORM AN EQUIPMENT CHECK
Verify that all ordered equipment and accessories have been received. Contact LABORIE if there are any
discrepancies between ordered and received equipment. Inspect the equipment for any visible signs of damage
or mishandling. Notify the carrier immediately if damage has been found. Carrying cases and cartons should be
saved to provide a convenient and safe way to return the equipment should service be required.
Refer to the following table for a list of standard and optional equipment.
EQUIPMENT
DESCRIPTION
Urocap IV Uroflowmeter (TRA851)
The Urocap™ IV uses a weight transducer to
measure both volume and flow rate. A beaker is
placed on top of the transducer. When urine is
collected in the beaker, the transducer detects
the change in weight and the Uroflow procedure
starts.
Urocap IV Power Supply (POW044)
The power supply and charger provides power to
the uroflowmeter. For medical safety it is the only
supply to be used for this device.
Power Cords (POW005 [110V]or POW740
[220V])
To conform to medical standards, the power cable
is of a medical grade accepted by hospitals. The
plug portion of the cord will vary depending on
which country the unit is delivered to or by
customer request.