LABORIE Urocap IV Owner’s Manual UC4-UM01
13
3
BATTERY: CHARGING AND MAINTENANCE
3.1
CHARGING THE BATTERY
The Urocap™ IV contains a rechargeable battery. To charge:
1.
Lift the tab on the bottom of the Urocap™ IV to reveal the charging port (A).
2.
Plug one end of the charging power supply cord into the charger port on the bottom of the device and the
other end into an electrical outlet.
3.
When LED light on the device is green, it is fully charged.
Figure 3 – Urocap™ IV charging port location
The equipment can be used while charging
3.2
PREVENTATIVE MAINTENANCE
•
Do not step on, drop, immerse in water, or puncture the battery. If misuse, abuse or damage is suspected –
or any form of mechanical damage to the casing is visible – discontinue use and contact LABORIE service.
•
If there is a sudden change to the battery’s ability to hold a charge or a sudden change in battery life is
noticed, discontinue use and contact LABORIE service.
3.3
TREATING AND DISPOSING OF PRODUCT AFTER USE
•
After use, discard any packaging according to your institution’s standard operating procedures on medical
waste handling.
•
For end of battery life, disposal must be handled according to local regulations.
•
For end of life product, waste electrical and electronic equipment should be collected separately and
returned to the designated local recycling service.
•
Packaging waste should be collected separately for available national packaging collection and recycling
services.
